KTM 50 SX PRO SENIOR LC - Manual (Page 28)

ENGLISH
27
Checking the gear oil level
To check the gear oil level, first remove the plug 1 . With the motorcycle
parked in an upright position, a small quantity of oil should flow out of the
indicator opening
2 . If oil must be added, tilt the motorcycle and pour
automatic gear oil ( Shell Donax TA) into the bore.
! CAUTION !
L ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR .
T HEREFORE , ONLY USE BRANDED PRODUCTS (S HELL Donax TA).
Changing gear oil *
The engine must be warmed up before changing the gear oil. Park the
motorcycle on a horizontal surface, remove the oil drain plug
3 and drain
the used oil into an appropriate container. Clean the sealing surface, mount
the oil drain plug together with the gasket and tighten to 15 Nm.
Remove stopper 4 and fill in 0.15 liters of automatic gear oil (Shell Donax
TA). Mount the stopper and check the engine for tightness.
! CAUTION !
L ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR .
T HEREFORE , ONLY USE BRANDED PRODUCTS (S HELL Donax TA).
1
2
3
4