Kenwood KDC-MP245 - Manual (Page 15)

English | 15
P.CONT
ANT.
CONT
MUTE
L R
Connecting Wires to Terminals
Ground wire (Black) - (To car chassis)
FM/AM antenna input
Fuse (10A)
Wiring harness
(Accessory
1)
Ignition wire (Red)
Battery wire (Yellow)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Car fuse box
(Main fuse)
Mute control wire (Brown)
Connect to the terminal that is grounded when either the telephone rings
or during conversation.
⁄
To connect the Kenwood navigation system, consult your navigation
manual.
Power control/Motor antenna control wire
(Blue/White)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Front output
(KDC-MP245 only)
Rear output/ Sub Woofer output
Not Used (Blue)
Front side
AUX input (Stereo)
Use the mini-plug cable which is stereo type
and does not have any resistance.
Battery
B64-4590-00_00_en.indd 15 09.10.8 10:48:28 AM