Kenwood KTC-HR100 - Manual (Page 8)

— 8 —
English
Connecting Wires to Terminals
■ If you want to connect the Control unit
Control unit
HD Radio tuner
Disc changer, etc.
To KENWOOD disc changer/
HD Radio control input
To control unit
To KENWOOD disc changer/
External optional accessory
FM/AM antenna
To connect these leads, refer to the
relevant instruction manuals.
(Front side)
(Rear side)
Connection wire
(Accessory1)
When you use Controller unit (optional accessory), refer
to <If you want to connect the Controller> of the next
page and connect Controller unit.
When the control unit is connected, you cannot use this
"TO CONTROLLER" input terminal.
Antenna cable
(Accessory6)
When connecting multiple units (such as the CD
Changer and KCA-S210A), connect the KTC-HR100
directly to the control unit.