Kenwood KTC-HR100 - Manual (Page 9)

— 9 —
■ If you want to connect the Controller
HD Radio
tuner
Controller unit (optional accessory) input
FM/AM antenna
When the controller unit is connected, you cannot use
this "TO SLAVE UNIT" input terminal.
(Front side)
(Rear side)
Car Audio unit
Audio output
(Left: White, Right: Red)
Power cable input
(optional accessory)
Audio input
HEAD UNIT
TO SLAVE UNIT TO
CHANGER 2
TO
CHANGER 1
TO
H/U
TO
SWITCH
AUX
OFF ON
SWITCH
PROTOCOL
O N
IN
AUX
]“N”
Please keep the total extension of the
control cable from the control unit to
the disc changer to 13 m or less.
Control cable lengths in excess of 13
m will cease to function properly.
• When connecting multiple units (such
as the CD Changer and KCA-S210A),
connect the KTC-HR100 directly to
the control unit.
• Set the PROTOCOL selection switch
to "N" position.
Disc changer
Control unit
■ If you want to connect KCA-S210A
HD Radio tuner KCA-S210A
Antenna cable
(Accessory6)