Loading the ribbon -5, Loading the ribbon – Kodak 6805 User Manual
Page 13
Setting Up the Printer
1-5
Loading the Ribbon
For the KODAK Photo Printer 6800, have a KODAK Photo Print Kit
6800/4R or KODAK Photo Print Kit 6800/6R available. These kits contain the
correct size ribbon for your printer. See Appendix A for details on the Photo
Print Kits (sold separately).
For the KODAK Photo Printer 6805, have a KODAK Photo Print Kit
6805/3R available. This kit contains the correct size ribbon for your printer.
See Appendix A for details on the Photo Print Kits (sold separately).
To load the ribbon into the printer:
1.
Slide the cover release toward you, then open the upper cover carefully.
IMPORTANT:
Cover does not open beyond a 90° angle.
CAUTION
:
The thermal head becomes extremely hot during normal
operation. Do not touch it.
2.
If you are replacing a ribbon, remove the used ribbon from the printer.
NOTE: Images remain on the ribbon after printing. If you need to maintain
confidentiality, dispose of the used ribbon appropriately.
3.
Insert your fingers into the holes in the plastic on the end of the ribbon.
Remove the plastic cover from the ribbon.
IMPORTANT:
Do not remove the wrapper from the ribbon at this time.
90˚
Wrapper