Kodak 6805 - Manual (Page 37)

5-1
5
Maintaining the Printer
To ensure good printer performance and high-quality prints, keep the printer
and its environment clean and dust-free.
Cleaning the Cabinet
Clean the exterior cabinet and filter openings regularly to eliminate dust
build-up and to prevent dirt from entering the printer.
CAUTION :
Never use abrasives or harsh chemicals to clean any part of the
printer. Do not allow any foreign objects or liquids to fall or
spill inside the printer. Fire or electric shock could result. If
any foreign object enters the printer, turn off the printer power
immediately, remove the power cord, and contact your KODAK
representative for service.
1. Wipe the exterior cabinet, print catcher, and trim tray with a damp,
lint-free cloth.
2. Vacuum the filter openings to remove dust.
Performing Routine Maintenance
To maintain good print quality:
1. Clean the stripper plate, platen roller, and cleaning rollers monthly,
using the alcohol pads included in the KODAK Thermal Printer Cleaning
Kit.
2. Only clean the thermal head when necessary. Do not include the thermal
head in your monthly cleaning process.
NOTE: If there is paper or ribbon loaded in the printer, remove it before
performing maintenance procedures.
WARNING :
Alcohol is a flammable liquid. It can cause eye irritation
and dry skin. Prolonged or repeated skin contact may cause
drying, cracking or irritation. Wash your hands with soap
and water following any maintenance procedures where
you use alcohol pads. For additional information, see the
Material Safety Data Sheet (MSDS).