Kenwood G-EQ300 - Manual (Page 21)

G-EQ300 (En/K)
2 1
Use of equalizer effect with tape
Preparation
: Keys and control used in the operations described on this page.
1
Set the TAPE switch to ON.
2
Select the “EQ.ON” mode.
3
Create a desired equalizer pattern.
4
Play a tape.
When playing a tape which has been recorded together with the equalizer effect, set the EQ.EFFECT key to OFF.
To stop tape playback
TAPE
EQ. ON
2.5k 3.9k 6.3k 10k 16 k 400 625 1k 1.5k 250 40 63 98 160
“EQ, ON” Lights up.
Lights up.
Applying equalizer effect to tape playback
Make preparation for playback.
● For the preparation for playback, refer to the
instruction manuals of the cassette tape deck.
See pages @ to )
Press the stop key of the cassette tape deck.
Note Note
TAPE
EQ.EFFECT