System connections, Caution regarding placement, Except for u.s.a., canada ) – Kenwood G-EQ300 User Manual

Page 8: Malfunction of microprocessor, Cassette tape deck (optional)

Advertising
background image

G-EQ300 (En/K)

8

LINE

IN

OUT

R

L

R

L

TAPE

PLAY

IN

REC
OUT

SYSTEM

CONTROL

AC OUTLET

R

L

REC

PLAY

TAPE 2

(MONITOR)

SYSTEM

CONTROL

L

R

REC

IN

LINE

PLAY

OUT

*

System connections

Make connection as shown below. When connecting the
related system components, refer also to the instruction
manuals of the related components.
3 Caution: Do not plug in the power lead until all connec-
tions are completed.

1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection

cords without removal of the power cord can cause malfunctions or damage on the unit.

3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.

Notes

Notes

Malfunction of microprocessor

If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microprocessor referring to “In case of difficulty”.

¢

Connect to the TAPE 2 (MONITOR)
jacks
Set the TAPE 2 (MONITOR ) switch
to the monitoring position.

Australia

Other countries

Audio cords

Audio cords

System control cord

To wall

AC outlet

This unit

AV CONTROL CENTER

Use the numbers

9 0 ! @ on the rear panel of this unit

when connecting it to an AV CONTROL CENTER or
RECEIVER.
Connections are easily completed by using Audio cords
to make connections to the same numbers on the other
component.

÷

When connecting the audio cords (cords with pin plugs on each

end), insert the white plugs into the L (Left) jacks and red plugs into
the R (Right) jacks.

Cassette tape deck (optional)

U.K.

U.S.A., Canada,
China and US military

÷

When a cassette deck is connected to the graphic equalizer,do not

connect the system control cord to the cassette deck.

Caution regarding placement

( Except for U.S.A., Canada )

To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater than,
shown below.
Left and right panels: 10 cm, rear panel: 10 cm

*CAUTION (For U.K.)

When using the AC outlet epuipped
with this unit, be sure to consult your
dealer for the correspond-ing plug.

Advertising