Kyocera Finecam SL400R - Manual (Page 117)

6-9
6
G
Using
th
e
SE
T
UP
M
ode F
unc
tions
This procedure sets the startup screen displayed when you switch the camera on. In
addition to the default Kyocera logo screen, you can also select a startup screen from the
images saved on a memory card in the camera.
● If either the Kyocera logo screen or OFF screen was selected in step 3
2
Press
U
or
D
on the 4-way button to select
[COLOR SELECT] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
the desired color and then press the OK
button
E
.
4
The selected settings are applied and the screen in step 2
reappears.
[START SCREEN]
Selecting the Startup Screen
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[START SCREEN] and then press
R
.
3
Press
L
or
R
on the 4-way button to select
the desired screen.
KYOCERA logo screen:Default
User-defined screen: Allows you to set an image stored on
a memory card.
OFF screen: Black background
4
Press the OK button
E
to finish the settings.
POWER SAVE
MODE LOCK
BEEP
SHUTTER VOL
COLOR SELECT
3MIN.
OFF
+2
+2
YELLOW
START SCREEN SET
SET UP(2/3)
POWER SAVE
MODE LOCK
BEEP
SHUTTER VOL
COLOR SELECT
3MIN.
YELLOW
RED
PURPLE
BLUE START SCREEN
OFF
SET UP(2/3)
POWER SAVE
MODE LOCK
SHUTTER VOL
COLOR SELECT
3MIN.
OFF
+2
+2
YELLOW
SET UP(2/3)
BEEP
START SCREEN SET
SELECT START SCREEN
SELECT IMAGE
OK
OFF