Kyocera Finecam SL400R - Manual (Page 66)

4-8
4
Us
ing
C
Cam
e
ra
Mode,
N
Cont
inuou
s
S
hoot
ing Mode
and
M
Mov
ie Mo
de
Applicable mode: C/N/M
Use exposure compensation to adjust the brightness of your images. This function is
especially useful for shots where you did not get the ideal exposure because subject and
background brightness differed a lot, and for images that you deliberately want to shoot
under- or overexposured.
This camera allows you to adjust the brightness up to plus or minus 2.0 EV in 1/3 EV
increments.
• The exposure compensation setting does not change after a shot is taken. (For example, if
compensation of +0.3 is set, all images shot subsequently will have an exposure
compensation of +0.3.)
• This setting reverts to the default value (±0.0) when the camera is switched off. To retain
the setting, set Mode Lock ( p.6-7) to ON.
• Exposure compensation when the flash is used is limited to between -1.0 and +1.0 EV.
• When the EVALUATION metering mode ( p.4-23) is used, the exposure compensation
may differ from the specified setting for some subjects.
[ ]
Using Exposure Compensation
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
C
”, “
N
” or “
M
” icon lights on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Use
L
or
R
on the 4-way button to select
EXP. COMP. [ ] and then press the OK
button
E
.
4
Press
U
or
D
on the 4-way button to select
the desired compensation setting and then
press the OK button
E
.
–2.0 EV to +2.0 EV
(13 levels in 1/3-EV increments)
5
The compensation setting ([+1.0], etc.)
appears on the LCD monitor.
• Press the MENU button K to clear the menu icons and make picture
taking easier.
Brighter Darker
–2.0  ±0.0 
(Default)
+2.0
EXP.COMP.
+1.0
Compensation
value
+1.0