Ken-A-Vision 7700 - Manual (Page 13)

WEB VIEWER 5
This section is designed to familiarize you with the main interface of the 7700.
Displaying the OSD and Digital Zoom are only taking place on the local
machine, not on the unit itself. To make global changes on the 7700 and its
video, you must login as an administrator.
1. Camera Image Display
2. OSD - Camera Name / Date / Time
3. Set Camera Name
4. Vertical Flip
5. Colour /Greyscale
6. Controls for Resolution, Frame rate, Quality, Brightness, and
Contrast
7. Stretch (will fit the video to the viewer window regardless of
resolution)
8. OSD (On Screen Display): Click this icon to display the
captions.
9. Disconnect from or connect to the server
10. Log out
11. 2x Digital Zoom
12. Save an image
13. Administration Tools
Network Video Flex ® 7700 Manual www.ken-a-vision.com
Viewer Screen
NETWORK SETUP 4
Configure your 7700's TCP/IP properties as follows:
Network Type STATIC
Internet Address A static IP address received from your
ISP, such as 24.107.88.125 [Example]
Subnet Mask Subnet mask assigned from your ISP,
such as 255.255.255.240 [Example]
Default Gateway 24.107.88.113 [Example]
A. Use the assigned default gateway
from your ISP
Primary DNS Server Use the 1st DNS Server from
"Assigned IP Addresses from My ISP"
A. If you did not receive any IP
addresses from your ISP, please
contact them and acquire the IP
address of their DNS server.
Web Server Port 80 [default]
A. You may select any number
between 1025-30000.
Video Server Port 7777
A. You may select any number
between 1025-30000.
Network Video Flex ® 7700 Manual www.ken-a-vision.com
Case C: Static (Fixed) IP [Dedicated line directly to the 7700]