Ken-A-Vision 7700 - Manual (Page 9)

7700 SETUP 3
6. Now you will be able to access the viewer software with
in the 7700
A. Open Internet Explorer and type the IP address of
192.168.1.80 (default IP of the 7700 from the factory)
into the Address Bar of the web browser (as seen
below). Press Enter.
B. If a message appears after pressing "Enter" similar to
the image depicted below, choose "Try Again". This
message will vary depending on the operating
system.
7. Now you will be able to see the login screen for the
7700.
8. The default ID and Password are both "admin".
9. If at any time you are prompted to download ActiveX
controls, you must click 'Yes', all content is safe.
A. You will have to click "Yes" twice to two individual
prompts. This allows your video to be displayed in
Internet Explorer.
Network Video Flex ® 7700 Manual www.ken-a-vision.com
ADMIN TOOL 6
Current Date/Time It shows the current Date/Time setting stored
in the 7700.
New Date/Time Date/Time can be set by the local computer,
synchronized to an online time server, or
manually set.
Network Video Flex ® 7700 Manual www.ken-a-vision.com
Date & Time Tool