Kathrein UFD 545 - Manual (Page 30)

Password
30
Passwort
You can prevent your satellite receiver being used by unauthorized persons by
means of a password. In this way, you can ensure your reception settings are not
changed by other persons. At the same time, you can activate the parental control
function to lock out various channels.
Keep your password in a safe place so that you always have access to your
channels should you ever forget it.
Factory setting
The password protection function is inactive in the factory setting.
Entering a password
Call up the main menu by pressing the
M
button:
In this menu, press the
ou
buttons to select "system parameters" and
confirm by pressing
O
.
Now press the
ou
buttons to select the "parental control" function and
confirm by pressing
O
. You may be asked to enter a password.
You can carry out the following settings in
this on-screen display:
Age limit: This setting is only effective if
the corresponding lock-out signals are
sent together with the transmission.
Lock list: Yes/No. With this option you can
lock or unlock the editing function for
channel lists.
Lock installation: Yes/No. With this option
you can lock or grant access to the
installation menu.
Enter new password: Here you can enter your (new) password with the aid of
the number buttons.
Confirm password: Here you enter your (new) password once again with the
number buttons to serve as a confirmation.
Personal: Here, enter the receiver identification which the receiver displays when
switched on. This may be a useful function to recognize the receiver in the case of
theft. See section "Notes on operation" for information on how to use the number
buttons on the remote control for alphanumeric entries. The factory setting is
"UFD 545".
You have now completed all settings for securing and identifying your satellite
receiver.