Kathrein UFD 545 - Manual (Page 34)

Setting System Parameters
34
Timer menu
See section "Timer settings".
Summer time
See above. Changeover in spring and autumn.
Confirm by pressing
L
twice.
TV type
Using the
-+
buttons, here you can set whether your television set is a
•
PAL
•
Multi-standard or
•
NTSC set
Confirm by pressing
L
twice
Picture format
Using the
-+
buttons, here you can select the picture format for your TV set.
Either
•
4 : 3 format or
•
16 : 9 format
Confirm by pressing
L
twice
Screen
Using the
-+
buttons, here you can select the type of screen format
•
Standard (P/S) = standard format for 4:9 TV sets or
•
Wide (letterbox display off) – the wide picture format is imposed on the 4:9 TV
set in this setting.
Confirm by pressing
L
twice.
A/V mode
Using the
-+
buttons, here you can select the type of video signal applied at the
SCART socket. Select the signal that your TV set can process.
Refer to the operating manual of your TV set!
•
Composite colour signal – basic band signal
(colour/picture/blanking/synchronous signal)
•
RGB – Red/Green/Blue signal or
•
Y/C – S-VHS signal (luminance/chrominance)
Confirm your selection by pressing
L
twice.