Kyocera 3200 series User Manual

Page 40

Advertising
background image

22

Using Touch2Talk

4. Speak your message while continuing to press the WT button.

5. Release the WT button when finished speaking your message. This

allows the called recipients in the group a chance to reply.

Note: When a T2T call is connected, there is a “no speaker” time-out. If no one

takes the floor of a T2T call for the duration of this time-out, then the T2T
call is disconnected automatically.

6. Press the WT button again to speak.

7. To end the T2T call, press

, or select

End Call

from the menu screen.

Adding a member to a T2T group

1. Select

Menu

Touch2Talk

Manage T2T Groups

Add Member

. The

Select

Group

screen appears. Highlight the group you want to add the new

member to.

2. Select

Next

. The

Add Member

screen appears. Highlight the name of the

new member that you want to add to the group.

Note: If no T2T contact names appear, or if the desired contact is not on the

list, then perform steps 5 through 9 of “Creating a T2T Group” on

page 20

.

Advertising