Kenwood HM-382MD - Manual (Page 30)

Basic section
30
1 1
2 2 4 4
3 3
3 3
5 5
Recording on TAPE
Pause the recording
Stop the recording
Stop the recording
1. Load a tape in deck.
1 Press the TAPE0 key
2 Insert a tape.
3 Press the TAPE0 key
÷ Differentiation between normal (TYPE ) and high (TYPE ) tape is set
automatically.
÷ Remove tape slack before loading.
2. Select the tape transport direction.
÷ When recording is started, the tape is transported in the direction selected in this
step.
Check the tape transport direction indicator. ™
÷ Wind the tape to the position where recording is to be started.
1 Press the play key.
2 Press the play key again.
3 Stop playback.
To reverse the transport direction
TAPE
2 3
TAPE
0
1 1
2 2