Kenwood HM-382MD - Manual (Page 48)

Application section
48
MD Edit Functions
C B A D C' E
C B A E D
1 2 3 4 5
1 2 3 4 5 6
1
3
2
TRACK EDIT
SET
P.CALL
M
DIVIDE
D
0
DIVIDE
02<>003
k o
Dividing a track
(TRACK DIVIDE)
Use the following procedure to divide a track into
two by inserting a track number in its middle.
For example, by inserting an additional track
number before the passage you are specially fond
of, it is easy to skip to there when you play the
disc later. Note that the track numbers of the
tracks located after the divided track are auto-
matically incremented.
Play the track to be divided.
Press the TRACK EDIT key at the desired
position.
÷ This operation is also possible during pause.
Always eject the MD after title entry or editing.
Perform the operations in the following procedure while the display is blinking.
( Pressing the key during play-
back initiates pause.)
2 Select “DIVIDE”.
1 Press the TRACK EDIT key.
3 Set it.
4
ENTER
COMPLETE
Each press switches the operation.
1 DIVIDE
2 COMBINE
3 ERASE
4 MOVE
After editing, eject and remove the mini
disc.
Execute the track divide operation.
÷ There is no blank space left between the two tracks.
÷ When the track to be split has a title, the two tracks will
have the same title.
Divided track (first half)
Divided track (second half)
(Up to 254 track numbers can be inserted addition-
ally by repeating
1 to 3 for each of them.)
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
÷ To abort "DIVIDE" in the middle, press the TRACK EDIT
key.
÷ "COMBINE" is not displayed during playback or pause of
the first track.