Kohler Single-Control bath and Shower Trim K-T16116 - Manual (Page 3)

Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of product damage to the K-306-KS valve
assembly.
When using this valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
Observe all local plumbing and building codes.
The finished wall or bath/shower unit must be installed prior to
installing this trim.
Before installing the trim, determine if the maximum water
temperature is acceptable to the user. If temperature adjustment is
needed, refer to the
″
Water Temperature Adjustment
″
section.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the
″
Off
″
position.
Shut off the main water supply.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Assorted
Screwdrivers Strap
Wrench Plumbers
Putty Thread
Sealant Hex Wrench
Kohler Co. 3 1025255-2-C