Kyocera Rio E3100 - Manual (Page 50)

50 Sound and Touch
Sound and Touch
From Sound and Touch, you can modify the
following features.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through
menus, and receive alerts (such as new
messages). You can silence all sounds and set
the phone to vibrate or to light up when you
receive calls and alerts.
From Ringer Mode, select one of the
following:
•
Normal Sounds rings for the incoming call
or alert (in effect, returning the phone to a
non-silent mode).
• Vibrate Only vibrates for the duration of
the incoming call or other alerts.
• Vibrate Then Ring vibrates for the first
ten seconds and then rings for the
remainder of the incoming call alert.
• Lights Only lights up for the duration of
the incoming call or other alerts.
You can also use the Volume key to activate
Vibrate Only mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
From Volume, you can modify the following
features.
Set Ringer Volume
1. From Ringer, use the slider control to
adjust the volume.
2. Touch Set to save.
Set Speakerphone Volume
1. From Speakerphone, use the slider control
to adjust the volume.
2. Touch Set to save.
Set Earpiece Volume
1. From Earpiece, use the slider control to
adjust the volume.
2. Touch Set to save.
Set Alarm Volume
1. From Alarm, use the slider control to
adjust the volume.
2. Touch Set to save.
Set Ringer
From Ringers, assign a sound from your
Gallery as your default ringer. To preview a
sound, touch the icon next to the name.
Set Power On Sound
From Power On Sound, select a sound to play
when your phone powers on. To preview a
sound, touch the icon next to the name.