Kyocera Rio E3100 - Manual (Page 9)

User Guide 9
1 Get Started
Phone Battery
Install Battery
1. Hold the phone face down.
2. Find the notch on the
bottom of the phone. It is
a rectangle. Using your
thumbnail, remove the
battery cover by prying it
up from the bottom.
3. Place the battery in the
battery casing. Make sure
that the metal contacts of
the battery and battery
casing touch.
4. Replace the battery cover
by sliding the notches
into the openings on the
top of the battery casing.
5. Snap the cover into place.
Charge Battery
1. The Micro-USB jack is
located on top of the
phone. Connect the AC
adapter to the Micro-USB
jack.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of
the screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note: Before removing the battery, make sure
the phone is powered off.
Qualcomm 3G CDMA
Qualcomm 3G CDMA