Kyocera Rio E3100 - Manual (Page 56)

56 Network
From Roam/Svc Alert, select one of the
following:
•
Disabled turns roaming service alert off.
• When No Svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
• On Roam Change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
• On Any Change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
From Roam Option, select Automatic (to
allow roaming) or No Roaming (to disallow
roaming).
Enable Roaming Call Alert
You can set the phone to warn you before you
answer or place a call while roaming.
From Roam Call Alert, select Enabled.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept
or place a call while roaming, you must
touch 1.
Note: Roam Call Alert is disabled when the
phone is in emergency mode.
Set Voice Privacy
From Voice Privacy, select Enhanced to use
enhanced digital CDMA privacy.
Enable Privacy Alert
From Privacy Alert, select Enabled to alert
you when enhanced digital CDMA privacy is
lost or regained.
Set Location Information
Use Location to share your location
information with network services other than
emergency services (for example, 911, 111,
999 and 000) in serviced areas. This feature
works only when your phone is in digital
mode. You do have the option of turning off
the locator to emergency services.
From Location, select one of the following:
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code.
• Location On shares your position
information, in addition to emergency
services.
Set Web Alerts
You can set an alert to confirm the start or end
of a browser session.
From Web Alert, select one of the following:
•
At Start prompts when you start a session.
• At End prompts when you end a session.
• Both prompts when you start and end a
session.
• No Prompts disables all web alerts.