Sounds – Kyocera TOMO S2410 User Manual
Page 39
User Guide
39
Set Brightness
1. From Brightness, scroll to change the
brightness level.
2. Select Save.
Set Contrast
1. From Contrast, scroll to change the
contrast level.
2. Select Save.
Set Language
From Language, select a language.
Set Time and Date Format
From Date/Time Format, select a time and
date format.
Sounds
Your phone has several settings that control the
sound. You can select from a variety of ringers
and adjust the volume.
Ringers
From Ringers, you can modify the following
settings.
Set Ringers
From Ringer Type, select a ringer. (Scroll
down the list to play the ringers.)
Enable Roam Ringer
From Roam Ringer, select Enabled to
activate a specific ringer for roaming calls.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through
menus, and receive alerts (such as new
messages). You can silence all sounds and set
the phone to vibrate or light up when you
receive calls and alerts.
From Ringer Mode, select one of the
following:
• Normal Sounds rings for the incoming call
or alert (in effect, returning the phone to a
non-silent mode).
• Vibrate Only vibrates for the duration of
the incoming call or other alerts.
• Vibe Then Ring vibrates for the first ten
seconds and then rings for the remainder of
the incoming call alert.
• Lights Only lights up for the duration of
the incoming call or other alerts.
You can also press and hold the # Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
From Volume, you can modify the following
settings.
Set Ringer Volume
1. From Ringer Volume, scroll right or left to
set the ringer volume.
2. Press the OK key to save.
82-R6017-2EN.book Page 39 Friday, December 4, 2009 8:13 AM