Kyocera TOMO S2410 - Manual (Page 40)

40 Accessories
Set Speakerphone Volume
1. From Spkrphone Volume, scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
Set Earpiece Volume
1. From Earpiece Volume, scroll right or left
to set the earpiece volume.
2. Press the OK key to save.
Set Keypad Volume
1. From Key Volume, scroll right or left to set
the keypad volume.
2. Press the OK key to save.
Enable Smart Volume
From Smart Volume, select Enabled to
automatically adjust the volume during a call,
based on surrounding noise levels.
Set Flip Sounds
1. From Flip Sounds, select Flip Open or
Flip Close.
2. Select a sound. (Scroll down the list to play
the sounds.)
Set Power On/Off Sounds
From Pwr On/Off, select Enabled to have
your phone play the sound when turned on.
Keypad
From Keypad, you can modify the following
settings.
Set Key Press Sounds
From Key Sounds, select Tone, Click, or Off
to set the sounds you hear when pressing the
keypad.
Set Key Tone Length
From Key Length, select Normal or Long to
set the length of the keypad tone.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From Headset Sounds, select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).
Enable Auto-Answer
From Auto-Answer, select After 5 Seconds.
The phone automatically answers after five
seconds with a headset attached.
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the
notification.
82-R6017-2EN.book Page 40 Friday, December 4, 2009 8:13 AM