Network, Connect to hearing aid device, Enable privacy alert – Kyocera TOMO S2410 User Manual

Page 41: Enable voice privacy, Enable roaming service alert, Set roaming restrictions, Enable roaming call alert

Advertising
background image

User Guide

41

3. Select one of the following:

TTY Off disables TTY.

TTY On enables TTY devices.

TTY On + Talk enables TTY devices

and voice carry over.

TTY On + Hear enables TTY devices

and hearing carry over.

Note: You can also enter ##889 with your

keypad and select TTY to enable TTY.

Connect to Hearing Aid Device

With a T-coil hearing aid device (sold

separately) connected, you can enable the

hearing aid feature.
1. Connect the T-coil hearing aid device to

your phone.

2. From T-coil Hearing Aid, select OK >

Enabled.

Network

Enable Privacy Alert

From Privacy Alert, select Enabled to set

your phone to alert you when enhanced digital

CDMA privacy is lost or regained.

Enable Voice Privacy

From Voice Privacy, select Enhanced to use

enhanced digital CDMA privacy.

Enable Roaming Service Alert

Use this setting if you want the phone to alert

you when you roam outside of your home

service area.

From Roam/Svc Alert, select one of the

following:

Disabled turns roaming service alert off.

When no svc alerts you with three tones

decreasing in pitch when service is lost and

three tones increasing in pitch when service

is acquired again.

On roam change alerts you with two

decreasing tones when roaming service is

acquired and three increasing tones when

home area service is acquired again.

On any change alerts you with three

increasing tones if there is a change in

roaming service or three decreasing tones if

the phone loses service.

Set Roaming Restrictions

You can restrict your phone from making a call
when roaming.
From Roam Option, select Automatic (to
allow roaming) or No Roaming (to disallow
roaming).

Enable Roaming Call Alert

You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone
is in Emergency Mode.
From Roam Call Alert, select Enabled.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept
or place a call while roaming, you must
press 1.

82-R6017-2EN.book Page 41 Friday, December 4, 2009 8:13 AM

Advertising