Kyocera TNT VMS200 - Manual (Page 31)

User Guide 23
Add code or extension
When you save the phone number of an automated
service, you may include a pause to stop dialing,
where you can wait to dial an extension.
1.
From the main screen, enter a phone number.
2. Select Options and a type of pause:
– Hard pause causes the phone to stop
dialing until you select Options >
Release while making the call.
– Time pause causes the phone to stop
dialing for two seconds.
3. Enter the remaining numbers.
4. Complete the contact and select Save .
Working with contacts
Contact details
To edit the details of an existing contact:
1.
Select Menu > Contacts > Find name .
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, select Edit .
4. Edit or add phone numbers, email addresses,
Web addresses, and notes. Scroll up or down
to move through the contact fields.
5. When you are done entering the information,
select
Save .
Contact name
To work on the name of an existing contact:
1.
Select Menu > Contacts > Find name .
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, scroll to the
contact name.
4. Select Options and one of the following:
– Ring tone assigns a specific ringtone to
the contact.
– TXT tone assigns a specific text message
tone to the contact.
– Picture assigns a specific picture to
the contact.
– Erase contact deletes the entire contact.
Contact number
To work on the number of an existing contact:
1.
Select Menu > Contacts > Find name .
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, scroll to a
contact number.
4. Select Options and one of the following:
– Call calls the contact.
– Send text msg sends a text message.
– Prepend displays the contact’s detail
screen for you to change the number
(adding an area code) or other data of
the contact.
– Add speed dial adds the number to your
speed dial list.
– View number displays the number.
– Erase number deletes the number from
the contact.
– Secret / Not secret makes the number
secret, hiding it from the screen until you
enter the lock code.
82-K8214-1EN.book Page 23 Tuesday, May 27, 2008 5:36 PM