Kyocera TNT VMS200 - Manual (Page 46)

38 Sounds
Set backlight duration
You can set the length of time that bright
backlighting remains on. Select
Menu >
Settings > Display > Backlight > Duration and
one of the following:
•
Disabled turns backlighting off.
• 7 seconds , 15 seconds , or 30 seconds
(default) turns backlighting on for a set time
after your last keypress.
Power save mode
You can activate the power save mode to dim the
backlight and conserve battery life. The power
save mode sets the backlight of the phone to the
lowest level. Select
Menu > Settings > Display >
Backlight > Pwr save mode > On .
Auto-hyphen
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan, such as
1-222-333-4444. Select
Menu > Settings >
Display > Auto-hyphen > Enabled .
Time and date format
Your phone can display different time/date
formats. Select
Menu > Settings > Display >
Time/Date format and a format.
Brightness
To change the brightness of the display:
1.
Select Menu > Settings > Display >
Brightness .
2. Scroll to change the brightness.
3. Select Save to save the setting.
Sounds
Your phone has several settings that control the
sound. You can select from a variety of ringtones
and control the volume.
Volume
You can control the volume of your
phone’s features.
Volume controls
To control the volume of the phone’s ringtone,
speakerphone, earpiece, and keypad:
1.
Select Menu > Settings > Sounds >
Ringtone volume , Speakerphone volume ,
Earpiece volume , or Key volume .
2. Scroll right to increase the volume or left to
decrease the volume.
3. Press the OK key to save.
Smart volume
To automatically adjust the volume during a call,
based on surrounding noise levels, select
Menu >
Settings > Sounds > Smart volume > Enabled .
82-K8214-1EN.book Page 38 Tuesday, May 27, 2008 5:36 PM