Kenwood KRF-A4030 - Manual (Page 4)

Operations
Preparations
Other
4
Notes:
1. Be sure to insert all connection cords securely. If their
connections are imperfect, the sound may not be pro-
duced or noise may interfere.
2. Be sure to remove the power cord from the AC outlet
before plugging or unplugging any connection cords. Plug-
ging / unplugging connection cords without disconnecting
the power cord can cause malfunctions and may damage
the unit.
3. Do not connect power cords from components whose
power consumption is larger than what is indicated on the
AC outlet at the rear of this unit.
Microcomputer malfunction
If operation is not possible or an erroneous display ap-
pears, even though all connections have been made
properly, reset the microcomputer referring to “In case of
difficulty”.
*
Connecting audio components
To AC wall outlet
CD player
IN
OUT
Record player
SYSTEM CONTROL jacks
6
Shape of AC outlets
IN OUT
OUT
OUT
Make connections as shown below.
When connecting the related system components, be
sure to also refer to the instruction manuals supplied
with the components you are connecting.
Do not connect the power cord to a wall outlet until all
connections are completed.
Cassette deck or
MD recorder
Cassette deck or
graphic equalizer
@
Setting up the system
Video deck Monitor TV
OUT
REC OUT PLAY IN
AUX MD / TAPE1 TAPE2/
MONITOR
PLAY IN REC OUT PLAY IN PLAY IN
PHONO CD
L
R
For U.K.
Other countries
CAUTION
Be sure to adhere followings. Or proper ventilation
will be blocked causing damage or fire hazard.
• Do not place any objects impairing heat radiation onto
the top of unit.
• Leave a space around the unit (from the largest outside
dimension including projection) equal or greater than,
shown below.
Top panel : 50 cm
Side panel : 10 cm
Back panel : 10 cm
Caution : Read this page carefully to ensure safe operation.