Kenwood KRF-A4030 - Manual (Page 7)

Operations
Preparations
Other
7
A SPEAKERS B
STANDBY
POWER
MULTI CONTROL
SOUND SOURCE DIRECT
AUTO BAND MEMORY
INPUT SELECTOR
VOLUME CONTROL
UP DOWN
BALANCE PTY TA/NEWS DISPLAY
PHONES
ON/STANDBY
ON OFF
STEREO
TUNED
AUTO
SP.
TI. VOL
S.DIRECT
TAPE 2 / MONI
TP TA NEWS PTY
* * * * * * * * .
MHz
kHz
A B MUTE MEMO MEMO
EON FM
AM
TAPE 2/MONITOR
Display
AUTO indicator
TUNED indicator
Standby mode
While the standby indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the
memory. This condition is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON
from the remote control unit.
Speaker indicators
S.DIRECT indicator
TAPE 2/ MONI indicator
1 ON/STANDBY ( ) key 0
Use to switch the power ON/STANDBY when the POWER
is turned ON.
STANDBY indicator
POWER key
0
2 MULTI CONTROL knob
Used to make a variety of settings.
3 BALANCE key !
Use to adjust the sound balance.
4 PTY key ^
Use to perform PTY search.
5 TA/NEWS key &
6 DISPLAY key $
Use to change the display indications when receiving RDS
broadcasts.
Use to adjust the brightness of the display.
7 VOLUME CONTROL knob 0
8 PHONES jack !
Use for headphone listening.
9 SPEAKERS A B keys 0
Use to turn speaker system A/B on and off.
0 SOUND key !
Use to adjust the sound quality.
! BAND key #
Use to select the broadcast band.
@ AUTO key #
Use to select the auto tuning mode.
# SOURCE DIRECT key !
$ MEMORY key $
Use to store radio stations in the preset memory.
% TAPE 2/MONITOR key 0 @
^ INPUT SELECTOR knob 0
Use to select the input sources.
MUTE indicator
Names and functions of parts
MEMO indicator
STEREO indicator
Frequency display, Input display,
Preset channel display
Band indicators
RDS indicator
RDS indicator
Main unit