Kenwood KRF-A4030 - Manual (Page 9)

Operations
Preparations
Other
9
Loading the batteries
Preparing the remote control
Notes:
1. The supplied batteries may have shorter lives than ordinary
batteries due to use during operation checks.
2. When the remote-controllable distance gets shorter than
before, replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct
light from a high frequency fluorescent lamp may cause a
malfunction.
In such a case, change the location of the system installa-
tion to prevent malfunction.
Model: RC-R0708
Infrared ray system
• When pressing more than one remote control key succes-
sively, press the keys securely by leaving an interval of 1
second or more between keys.
Operation
Operating range
(Approx.)
1 Remove the cover. 2 Insert the batteries.
3 Close the cover.
• Insert two AA-size (R06) batteries as indicated by the
polarity markings.
Names and functions of parts
When the “STANDBY” indicator is lit, the power turns ON
when you press the POWER (
) key on the remote control.
When the power comes ON, press the key you want to
operate.
Remote sensor
30˚
6 m
30˚