Kompernass KH 1090 - Manual (Page 6)

- 4 -
Placement
Place the switched-on fondue exclusively on level,
firm and heat-resistant surfaces in a dry environment.
Important
!
To avoid heat related damage and the risk of a
fire in the surroundings of the switched-on Electrical
Fondue, take steps to ensure that …
• the switched-on fondue has an all-round minimum
distance of 50 cm from walls, furniture and other
objects.
• no objects are suspended above the switched-on
fondue (e.g. lamps).
• there are no easily inflammable objects close to
the switched-on fondue (e.g. materials/textiles).
• the power cable 4 and the thermo-plinth 5 are
not located close to hot surfaces or open flames.
• the power cable 4 does not, and cannot, make
contact with the thermo- plinth 5.
• no moisture and/or fluids can permeate into the
thermo- plinth 5.
Before the first use
Remove all components of the Electrical Fondue
from the packaging. Remove all possibly remaining
protective foils and clean any packaging-dust remnants
from all components that will come into contact with
foodstuffs.
Do not use any abrasive cleaners or scouring pads
as these will scratch the surfaces!
Taking into use
Note:
On the first usage, the generation of light smoke
and a slight smell can occur, this is due to production
residues. This is completely normal and is not
dangerous. Provide for sufficient ventilation, for
example, open a window.
1. Insert the power cable 4 into the thermo-plinth 5.
2. Insert the power cable 4 into a wall power socket.
3. Place the fondue-pot 3 onto the thermo-plinth 5.
Ensure that the Fondue pot 3 stands safely and
level on the thermo-plinth 5.
Attention!
Never lay aluminium foil or other materials between
the thermo-plinth 5 and the fondue-pot 3, if you
do, irreparable damage may be caused to the Elec-
trical Fondue. Additionally, there would be the danger
of a fire!
Warning regarding appliance
damage!
• NEVER place other kitchen implements (e.g.
cooking pans) instead of the Fondue pot 3
onto the thermo-plinth 5. Other cooking pans
could tip over during use, as the thermo-plinth 5
is designed to accept only the Fondue pot 3.
• Also, do not use the fondue-pot 3 as a cooking
implement on other heat sources (e.g. on hotplates),
it could be irreparably damaged.
• Never apply heat to an empty fondue-pot 3.
4. Pour the amount of cooking oil or bouillon required
for the selected dish into the fondue pot 3.
IB_KH1090_E40524_LB6 23.07.2008 13:34 Uhr Seite 4