Kompernass KH 1090 - Manual (Page 8)

- 6 -
6. Place the fondue-pot 3 with the food to be kept
warm onto the thermo-plinth 5.
7. Turn the temperature regulator 6 to heating
level 1-2 for the keeping warm of liquid dishes
such as soup etc. .
Cleaning and Care
Attention!
First of all remove the power cable 4 from the wall
socket before cleaning the Electrical Fondue and its
components! Otherwise, there is the risk of receiving
an electric shock!
Attention!
After using the Electrical Fondue, wait until the
thermo-plinth 5 and the fondue-pot 3 have cooled
down completely! The risk of burns is ever present!
When you have removed the power cable 4 of
the Electrical Fondue from the wall socket and the
fondue-pot 3 and the thermo-plinth 5 have cooled
down …
1. Remove the cooking oil from the fondue-pot 3.
2. Wash the fondue-pot 3 thoroughly in warm
water with a mild dish detergent.
3. If necessary, clean the housing of the themo-
plinth 5 with a moist sponge.
Attention!
NEVER submerge the thermo-plinth 5 in water to
clean it! The appliance could become irreparably
damaged!
Storage
• Remove the power cable 4 from both the wall
socket and the thermo-plinth 5 when the appliance
is not being used.
• Always wait until the thermo-plinth 5 and the
fondue-pot 3 have cooled down completely
before packing the Electrical Fondue and its
components away after use.
• For the sake of safety, always store the Electrical
Fondue out of the reach of children.
Troubleshooting
Should the Electrical Fondue not function or not
function correctly …
1. Check to ensure that the power cable 4 is
correctly connected to the thermo-plinth 5.
2. Check to see that the power cable is correctly
connected to the wall socket.
3. Check to see if the wall socket to which the Elec-
trical Fondue is connected is "live", in that another
appliance is connected to it.
If the malfunction cannot be traced back to one of
these causes …
4. Remove the power cable from the wall socket
and allow the thermo-plinth 5 to cool down
completely.
5. Re-insert the power cable into a wall socket.
Should the malfunction not be corrected by the
measures described above, please make contact
with one of our service-partners in your locality.
IB_KH1090_E40524_LB6 23.07.2008 13:34 Uhr Seite 6