Kenwood MD-MT877W - Manual (Page 17)

17
Inserting a MiniDisc
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:
● Do not place the MiniDisc under the holder.
● If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
● The lid cannot be opened if “TOC” is displayed refer to
the instruction on page 22.
3
4
1
2
Preparation
–
Inserting a MiniDisc
–
Recordable Recording
prevented
When you record on a
MiniDisc, check that the
erase prevention tab is
set to the “recordable”
position.