Kenwood TK-3173 - Manual (Page 26)

17
To enter the password using the DTMF keypad (keypad
models only):
1
Press the DTMF keys corresponding to the password.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
2 Press the S or key to confirm the password.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
A
DJUSTING THE
V
OLUME
Rotate the Power switch/ Volume control to adjust the
volume. Clockwise increases the volume and counter-
clockwise decreases it.
S
ELECTING A
Z
ONE AND
C
HANNEL
/ G
ROUP
ID
Select the desired zone using the selector or the keys
programmed as Zone Up/ Zone Down.
Select the desired channel or group ID using the selector or
the keys programmed as CH/GID Up/ CH/GID Down.
Names can be programmed for zones and channels/ group
IDs with up to 8 characters each. Your dealer can set the
zone name to a length of 0 to 8 digits. Channel/ group ID
names will shorten appropriately, to fit in the 8-digit display.
For example, if the channel/ group ID name is “GRP 1” and the
zone name is “KENWOOD”, and your dealer sets the zone
name to 3-digits, the following display will appear: