Kenwood TK-3173 - Manual (Page 51)

42
B
ATTERY
S
TATUS
I
NDICATOR
The battery status indicator displays the battery power
remaining when using an optional battery pack, as illustrated
below. (The battery status indicator does not appear while
using alkaline batteries.)
High Sufficient Low Very Low
When the battery power is very low, replace or recharge the
battery pack. If activated by your dealer, an alert tone will
sound every 30 seconds and the LED indicator will blink red
when the battery power is low.
B
EGINNING
/ E
ND OF
T
RANSMIT
S
IGNAL
The Beginning of Transmit and End of Transmit identification
signals are used to access and release some repeaters and
telephone systems.
If Beginning of Transmit is set, the ID signal is transmitted
when you press the PTT switch.
If End of Transmit is set, the ID signal is transmitted when you
release the PTT switch.
If both are set, the ID signal is transmitted when you press
and release the PTT switch.