Kodak G600 - Manual (Page 18)

12 www.kodak.com/go/support
Printing without a computer
Selecting pictures on your camera for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging
pictures on other brands of ImageLink system-compatible cameras, see the camera user’s guide.
1 Press the Share button on your camera.
2 Press to locate a picture.
3 Make sure Print is highlighted (to tag all pictures in the current image storage
location, highlight Print All ), then press the OK button.
4 Press to select the number of copies (0–99). The default is one. Zero
removes the tag for a selected picture.
■ To apply a print quantity to other pictures, press to locate them. Keep
the print quantity as is, or press to change it.
5 Press the OK button.
6 Press the Share button to exit.
Printing tagged pictures
If your camera or memory card contains pictures tagged for printing (see page 12 , or
your camera user’s guide), the printer dock gives you the option to print tagged
pictures first. If your camera is docked, a message appears on the camera screen
indicating that tagged pictures have been found:
■ To print tagged pictures—press .
The Print light blinks, printing starts, and tagged pictures are printed. Print tags are
removed from tagged pictures on your camera or card as they are printed.
■ To bypass printing of tagged pictures—press on your camera and
select Exit, then press .
NOTE: If you tagged pictures for printing using your digital camera, instead of printing the current picture,
all tagged pictures are printed.
NOTE: When printing tagged pictures, the number of copies that are printed is
determined by the setting on your camera or device.