Kodak G600 User Manual
Page 52
46
www.kodak.com/go/support
Troubleshooting
Nothing
happens when
you try to print
(from computer)
■
Make sure your computer meets the minimum system requirements.
Upgrade your system, if necessary (see Helpful links,
).
■
Check the USB connections from the printer dock to the computer
(
).
■
The computer may be transferring pictures. Cancel the transfer (
),
then try to print again.
■
Close unnecessary software applications. Disconnect then reconnect the
USB cable from the printer dock to the computer (
).
■
Access the printer menu for your system. Remove check marks next to
Pause Printing and Offline, if checked.
■
Install Kodak EasyShare software (
). If you choose Custom
installation, make sure to install the printer driver.
■
Uninstall, then reinstall Kodak EasyShare software (
Printing is slow
NOTE: When printing a large number of prints, printing may slow down to prevent the
print head from overheating.
■
Move the printer dock from direct sunlight; operate in a
temperature-controlled environment.
■
Do not block the cooling vents; keep them clean (
).
■
Close unnecessary software applications.
■
Make sure your computer meets the minimum system requirements.
Upgrade your system, if necessary (see Helpful links,
).
If...
Try the following