Kodak G600 - Manual (Page 54)

48 www.kodak.com/go/support
Troubleshooting
Transfer/communication problems
If... Try one or more of the following
Nothing happens
when you try to
transfer pictures to
the computer ■ Press the Transfer button, , on the printer dock.
■ Check the power and USB connections from the printer dock to the
computer (
page 22 ).
■ Reseat the camera on the printer dock ( page 7 ).
■ Remove the docked camera ( page 7 ). Check the USB connections
between the printer dock and the USB flash drive (disconnect then
reconnect them to re-establish the connection).
■ Close unnecessary software applications and minimize remaining
application windows. Follow any messages on the screen that may
have been hidden by other windows.
■ Disconnect then reconnect the USB cable from the printer dock to the
computer (
page 22 ).
■ Make sure your computer meets the minimum system requirements.
Upgrade your system if necessary (see Helpful links,
page 55 ).
■ Install Kodak EasyShare software ( page 20 ). If you choose Custom
installation, make sure to install the printer driver.
■ Uninstall, then reinstall Kodak EasyShare software ( page 20 ).