Kenwood TK-7160 - Manual (Page 15)

9
• None
No function is programmed onto the key.
• Operator Selectable Tone
Press to enter OST (Operator Selectable Tone) Select mode. Refer to page
16 for details.
• Public Address
Press to activate the Public Address (PA) system. Refer to page 24 for
details.
• Scan Del/Add
Press to add or remove the selected channel to/from the Scan list. Refer to
page 13 for details.
• Scan On/Off
Press to toggle the Scan function ON and OFF. Refer to page 12 for details.
• Scrambler
Press to toggle the Voice Scrambler ON and OFF. Refer to page 25 for details.
• Selcall
Press to enter FleetSync Selcall mode. Refer to page 20 for details.
• Selcall + Status
Press to enter FleetSync Selcall mode. Press again to enter FleetSync Status
mode. Refer to pages 20 and 21 for details.
• Send GPS
Press to send GPS data using FleetSync. Refer to page 20 for details.
• Squelch Level
Press to enter Squelch Level Adjustment mode. Refer to page 24 for details.
• Squelch Off
Press to open the squelch, to hear weak signals or adjust the volume level
when no signal is present. Press again to return to normal operation.
• Status
Press to enter FleetSync Status mode. Refer to page 21 for details.
• Talk Around
Press to communicate with other transceivers without the use of a repeater.
Press again to return to normal operation. Refer to page 23 for details.
• Volume Down
Press to decrease the volume level.
• Volume Up
Press to increase the volume level.
• Zone Down
Press to decrease the zone number.
• Zone Up
Press to increase the zone number.
1 Direct Zone Channel can be programmed only on the S, A, <B, C>, and keys.
2 Emergency can be programmed only on the key.