Kodak DVD 40 - Manual (Page 18)

18
Advanced Features
Modes and Features Setup
Press to change your selection
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
[S-Video] - Select if you connected the DVD player to your TV
using the composite Video output.
[YUV] - Select if you connected the DVD player to your TV using
the YUV output.
[Y Pb Pr] - Select if you connected the DVD player to your TV using
progressive scan.
Note:
The Composite video and S-video output is always available.
Select [Video Output], and press ENTER or to display
the [Video Out] submenu:
Audio Setup
The Audio menu allows you to set the analog audio out-
puts to correspond with the external components you have
connected to the player. For example, if you connected the
player to a TV using the Stereo Audio jacks, you should set
front speaker to PRESENT and other speaker to NONE to
enjoy down mixed stereo audio.
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
You can change the status of these speakers by select
these items.
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Bass Management:
you can select Bass redirection or not.
ON
OFF
present
large
small present
large
small
none
present
large
small
none
present
none
manual dvd-40 EN.qxd 07/10/2004 12:17 PÆgina 18