Important safety instructions, Introduction – Kodak DVD 40 User Manual

Page 5

Advertising
background image

Introduction

Important Safety Instructions

1. Read Instructions
All the safety and operating instructions should be read before the
product is operated.

2. Retain Instructions
The safety and operating instructions should be retained for futu-
re reference.

3. Head Warnings
All warnings on the product and in the operating instructions
should be adhered to.

4. Follow Instructions
All operating instructions should be followed.

5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.

6. Attachments
Do not use attachments not recommended by the product manu-
facturer as they may cause hazards.

7. Water and Moisture
Do not use this product near water for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.

8. Accessories
Do not place this product on an unstable cart, stand, tripod, brac-
ket, or table. The product may fall, causing serious injury to a
child or adult, and serious damage to the product. Use only with
a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the pro-
duct should follow the manufacturer's instructions, and should use
a mounting accessory recommended by the manufacturer.

9. Portable Cart Warning
A product and cart combination should be moved with care.
Quick stop, excessive force, and uneven surface may cause the
product and cart combination to overturn.

10. Ventilation
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruc-
tions have been adhered to.

11. Power Sources
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product dealer
or local power company. For products intended to operate from
battery power or other sources, refer to the operating instructions.

12. Grounding or Polarization
This product may be equipped with a polarized alternating current
line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try rever-
sing the plug. If the plug should still fail to fit, contact your elec-
trician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.

13. Power Cord Protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the product.

14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so as to provi-
de some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA
70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antennadischarge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure below.

15. Lightning
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power lines surges.

16. Power Lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them
might be fatal.

17. Overloading
Do not overload wall outlets, extension cords, or integral conve-
nience receptacles, as this can result in a risk of fire or electric
shock.

18. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any
kind on the product.

19. Servicing
Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.

20. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:

5

manual dvd-40 EN.qxd 07/10/2004 12:17 PÆgina 5

Advertising