Kodak DVD 40 - Manual (Page 33)

Others
Troubleshooting
33
NO PICTURE OR SOUND
Ensure the power button is on.
Ensure the power outlet is operational.
Ensure the power cord is not damaged.
Ensure the power plug is connected firmly to the outlet.
PICTURE BUT NO SOUND
Ensure the audio RCA are securely connected.
Ensure the audio connector is not damaged.
Ensure the volume is turned up in VOL/CH setup.
Ensure you have set the player's AUDIO settings
correctly.
Ensure you have ENTERed the correct AV input for your
TV.
Ensure the audio is not set to mute.
SOUND BUT NO PICTURE
Ensure the video RCA are securely connected.
Ensure you have ENTERed the correct AV input for your
TV.
Ensure the video connector is not damaged.
Ensure you have set the player's VIDEO settings
correctly.
POOR PICTURE OR SOUND
Ensure you have set the player's AUDIO settings
correctly.
Ensure the disc is not scratched or stained.
Ensure the AV connector or the output terminal is not
damaged.
"BAD DISC" DISPLAYED
Ensure the disc is not warped, damaged or deformed.
Ensure the disc is not badly stained or damaged.
Ensure the disc format is compatible with the player.
Please check whether you have tried to play a software
CD.
If so, please restart the player.
REMOTE NOT WORKING
Ensure the remote batteries are working.
Point the remote control directly at the player's IR
sensor.
Remove any obstacles between the remote and the IR
sensor.
"NO DISC" DISPLAYED
Ensure you have put the disc on the tray.
Ensure the disc is not upside down.
Ensure the disc is not distorted, stained or scratched.
If you have any questions, please consult the troubleshoo-
ting guide below.
manual dvd-40 EN.qxd 07/10/2004 12:17 PÆgina 33