Kenwood TK-2200L - Manual (Page 20)

2
i
nStAlling the
c
Ap over the
S
peAker
/ m
icrophone
J
AckS
i
nStAlling the
o
ptionAl
S
peAker
/ m
icrophone
(
or
h
eAdSet
)
If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks
using the supplied 3 x 6 mm screw.
Note: To keep the transceiver
water resistant, you must cover the
speaker/ microphone jacks with the
supplied cover.
2
1
2
Attach the locking bracket using
the supplied 3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
Insert the speaker/ microphone
(or headset) plugs into the speaker/
microphone jacks.
Note: Always switch OFF the
transceiver power when installing
or removing a speaker/ microphone
or headset.