Kenwood TK-2200L - Manual (Page 47)

39
TROUBLESHOOTING GUIDE
Problem Solution
Cannot turn the
transceiver power
ON.
• The battery pack may be dead.
Recharge or replace the battery pack.
• The battery pack may not be installed
correctly. Remove the battery pack
and install again.
Battery power
dies shortly after
charging.
• The battery pack life is finished.
Replace the battery pack with a new
one.
Cannot talk to or
hear other members
in your group.
• Make sure you are using the same
frequency and QT/DQT settings as the
other members in your group.
• Other group members may be using
the Scrambler function. Turn on your
transceiver’s Scrambler.
• Other group members may be too
away. Make sure you are within range
of the other transceivers.
Other voices
(besides group
members’) are
present on the
channel.
• Change the QT/DQT settings. Make
sure all group members change the
settings on their transceivers to match
the new QT/DQT setting.