Kenwood TK-2200L - Manual (Page 44)

36
■
Temporary Delete
You can temporarily remove specific channels from the
scanning sequence during Scan. When Scan pauses at a
channel, you can remove that channel from the scanning
sequence by pressing and holding the key programmed
as Temporary Delete for  second or Scan + Temporary
Delete for 3 seconds.
• You cannot remove a channel if there will be less than
2 channels available for scanning remaining.
• To add the removed channels back into the Scan list, simply exit
Scan mode or switch the transceiver power OFF and then ON
again.
S
crAmBler
Whereas the Quiet Talk and Digital Quiet Talk functions
{page 20} allows you to ignore unwanted calls, Scrambler allows
you to hold a conversation in complete privacy. When activated,
any other party listening in on your channel will be unable to
understand your conversation. The transceiver scrambles your
voice so that anybody listening to your conversation will not be
able to understand what you are saying.
In order for members of your own group to understand your call
while you are using the Scrambler, all other members must also
activate the Scrambler on their transceivers. This scrambles
everybody’s voice while transmitting and unscrambles the
voice message on your own transceiver when you receive the
message.
To activate the Scrambler, press the key programmed as
Scrambler.
To deactivate the Scrambler, press the Scrambler key again.