Kathrein UFS 733si - Manual (Page 11)

11
FIRST INSTALLATION
Before using your unit for the fi rst time, read the “Safety Instructions” and
“Connection and Setup” sections.
The “Connection Example” section provides a sample confi guration.
Do not connect the receiver to the power supply until all installation work has been
properly carried out.
The guidance given in the “First Installation” section assumes that the receiver
has been properly connected as per the “Safety Instructions” and “Connection and
Set-Up” sections.
First switch your TV set on and select the AV channel slot. Connect your receiver to the power supply.
The following display appears:
Use the

buttons to select the desired menu language. Pressing the
!
(green) button loads the
desired menu language and opens the next menu: