Kathrein UFS 733si - Manual (Page 53)

53
TV Output Format:
Select the type of video signal that is to be at the Scart socket here. Select the signal that your TV set
can process.
Refer to the operating instructions for your television set!
You can choose between the following settings: RGB (Red/Green/Blue signal), S-video (luminance/
chrominance) and CVBS (Colour Video Baseband Signal)
VCR Output Format:
You can choose from the following settings: S-video and CVBS
AFD Automatic:
This setting corrects the screen format automatically if the broadcast screen format varies from that
displayed
Teletext:
You can select whether the Videotext is controlled by the TV remote control (external, Videotext signal
is processed by the TV set) or by the receiver remote control (internal, Videotext signal is processed
by the receiver).
Restore Default Settings:
Here you can restore the default settings for video and audio
BOX SETTINGS
MENU SETTINGS
Use the

buttons to select the
line you want to change. Use the

buttons to make the changes.
Info Banner Duration:
Here you can set the following banner
display times: “Permanent”, “None”
and then in 1-second steps up to
15 seconds.
Info Banner Automatic:
Here you can set whether the info
banner is automatically displayed at
the start of a broadcast or not.
Menu Language:
Here you can set the following menu languages: German, English, French, Spanish, Italian, Czech, Dutch
and Turkish.
To quit the menu and save the changes, press the

button.