Kyocera 3250 - Manual (Page 22)

14 Using Push To Talk
Leaving a PTT group
You cannot leave a PTT group that you created.
1. Select Menu → Push To Talk →
Manage PTT Groups
→
Select Group .
2. Highlight the name of the group you want to leave.
3. Press . The message, “Leave Group?”
appears.
4. Select Yes to leave the group, or No to discontinue
and return to the home screen. A message
requesting that you be removed from the group is
sent to your service provider. Your phone returns
to the PTT menu.
Dealing with multiple calls
There will be times when you have to handle multiple
call situations. For example, you are engaged in an
active PTT call, and a new cellular call arrives as a call
waiting call.
Receiving calls
There are three call situations:
1. Receiving a cellular call while on a PTT call
2. Receiving a PTT call while on a PTT call
3. Receiving a PTT call while on a cellular call
These call situations may occur while you are engaged
in an active PTT or cellular call and a new PTT or
cellular call arrives as a “Call Waiting” call. You can
answer or ignore the incoming call.
• To answer the call, select the
Answer softkey on
the screen or press .
Note: If you accept the incoming PTT or cellular
call, you will have one call active and another call
on hold. Toggle between the two calls by using
.
• To ignore the call, select the Ignore softkey on the
screen.
Placing calls
There are three placing call situations:
1. Placing a PTT call while on a cellular call
2. Placing a cellular call while on a PTT call
3. Placing a PTT call while on a PTT call
These placing call situations may occur while you are
engaged in an active PTT or cellular call and you want
to originate a new PTT or cellular call, without ending
the original call.
82-K5960-1EN.book Page 14 Monday, May 3, 2004 10:47 AM