Kyocera 3250 - Manual (Page 50)

42 Using Voice Recognition
Training voice recognition
If your phone is having trouble recognizing your voice,
you can train it with the commands
“Yes,” “No,” and
“Wake up.”
1. Select Menu → Settings → Voice Services .
2. Select Voice Training .
3. Read the message and press .
4. Select Train All .
– Follow the prompts for each word until
training is complete.
Using voice features with
hands-free car kits
You can use voice commands to make a phone call or
to answer the phone only if your phone is connected to
a professionally installed Kyocera hands-free car kit
(sold separately).
Note: The following features apply only to installed
hands-free car kit unless noted.
To shop for hands-free car kits, visit www.kyocera-
wireless.com/store or call (800) 349-4188
(U.S.A. only) or (858) 882-1410.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice command to
activate the phone to make a phone call.
Note: Voice Wake-up does not work with Keyguard
active.
To activate the Voice Wake-up setting:
1. Select Menu → Settings → Voice Services →
Voice Wake-Up → With ext. pwr .
2. Select Menu → Settings → Keyguard →
Disabled , then press .
To wake up the phone:
1. Say “ Wake Up ” and listen for a tone.
2. Say “ Wake Up ” again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 42.
82-K5960-1EN.book Page 42 Monday, May 3, 2004 10:47 AM