Kyocera 3250 - Manual (Page 60)

52 Customizing Your Phone
2. Select the speed. The options are: 19.2 kbps , 115.2
kbps (default), 230.4 kbps .
Note: There may be a higher charge for making calls
using high-speed data in areas where 1X service is
available. Check with your service provider for details.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with a
TTY device.
1. Connect the TTY device to the phone.
2. Enter from your
keypad.
3. Press to select the TTY option.
Setting the phone to receive data or
faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. To receive data or faxes, you must
connect the phone to a laptop or PC and switch the
phone from voice mode to data/fax mode.
Note: To purchase a cable, contact your service
provider, or call us at (800) 349-4188 (U.S.A. only)
or (858) 882-1410, or visit us online at
www.kyocera-wireless.com/store .
1. Connect the phone to the laptop or PC.
2. Select Menu → Settings → Network →
Data/Fax Calls .
3. Press to select an option:
– Voice only —Allows only voice calls.
– Fax, next call or Data, next call —Sets the
phone to fax mode or data mode for the next
incoming call or the next 10 minutes.
– Fax, until off or Data, until off —Forces the
phone into fax mode or data mode until the
phone is turned off.
Note: You cannot receive voice calls while the phone
is in data/fax mode.
82-K5960-1EN.book Page 52 Monday, May 3, 2004 10:47 AM