Kodak 645 - Manual (Page 51)

The Basics
51 Contents Back Next Index
Attaching the DCS 645 to the Camera Body and Connecting Accessories
Attaching the DCS 645 to the Camera
Body
1 To remove the body cap, rotate the DCS 645
Release button to the left and press, then pivot
the top of the cap away from the DCS 645.
IMPORTANT:
Do not touch or strike the exposed IR filter or
anti-aliasing filter or set it down on a surface.
Do not install the DCS 645 battery or connect the
AC adapter to the DCS 645 until it is mounted on
the camera body.
2 MAMIYA 645 AF or MAMIYA 645 AFD: Rotate
the Shutter release mode selector lever to L
(lock).
CONTAX 645: Rotate the main power switch
to the Off position (red mark not visible).
DCS 645
Release
button